How to Protect Outside Faucets from Freezing (Guide)

Water freezing in the middle of a pipe or faucet is an ordinary cause of flow in the cold season of the year and that is winter.

Though it may be unreasonable, flow won’t naturally be at the point in the pipe where the water becomes cold enough and become a solid because it will refrigerate the water.

Instead, it is usually being coming after of that, between the frozen area and an out of service faucet that means it is closed.

It’s the enlargement of water strain in the pipe that matter the leak, not the side of ways development of the ice.

Therefore, if you’re troubled about an outdoor faucet freezing, follow the steps to isolate the pipe that supplies it, as well as to take care of the faucet itself.

Complete Guide to Protect Outside Faucets from Freezing

Outside Faucets from Freezing


Cover up all disclosed pipes dominant to the faucet with foam pipe insulation.

It appears pre-slit, and all you have to do is chop it to breathe with a knife, open the aperture, capable to fit the insulation around the pipe and close it another time.

It’s a good concept to add to the insulation by surround with a covering it with PVC pipe tape.

Clear away the garden hose in cultivated plants and flowers from the faucet and cover it up with a polystyrene faucet cover or with rags if you’re carrying one or two nights of a little cold climate and you plan to be home.

Allow the faucet drop about five bits per minute if you’re expecting climates down 28 degrees Fahrenheit.

A quantity of small drip maintains water abounding just plenty to continuing it from freezing.

Change off the water to the faucet, accessible it and allowance it open to conserve it for a deep period of disclosure to freezing climate.

You can protect the faucet if you will leave it for a very long period of time and this is the best way of protection.

While protection of the outdoor faucets from freezing you will need the following items:

  • The first and the main thing you need is the pipe foam that can insulate.
  • Then you have to need a knife of utility.
  • You also need a pipe tape of PVC.
  • You have to cover it from polystyrene faucet cover.
  • And the last thing you need is rags.

Tips to Follow!

Protect Outside Faucets

Different climates can produce you moderate daytime temperatures and very cold night time ones in some of the climates are areas like mountainous particularly.

If you are using the faucet during the day and if you live in such an area, protect the pipes and the faucet by putting electric heat tape on the pipes and turning it on at night.

To wrap your outdoors faucets you only need a few supplies. From the rag pile, you will need an old shirt or towel for every faucet, including wide tap, plastic shopping bag and large zip locks such as packing tape or duct tape.

You have used painters tape in a pinch or tied it with string. That’s it. You can also use an old shirt of holey that you can easily be pulled out of the soon to be the pile of rag.

Warning that you must remember while protection

You have to figure it out that where the major water shut off to your home is and you will be able to respond quickly if you will learn how to operate it in case of a burst pipe.

Conclusion – Wrapping It Up

In this article, you can easily learn that how to protect the outdoor faucets from freezing and cold temperatures because when cold weather strikes, outdoor water spigots can freeze and burst, leaving you with an unexpected repair bill.

And especially in winter nights don’t forget to wrap your outdoor pipes and faucets.

If you will leave water dripping it will also be a good idea or your kitchen cabinet doors open a bit. Then after doing this, you don’t want to deal with a busted pipe.

Leave a Comment