How To Repair Moen Bathroom Faucets? – A Step By Step Guide

If you are looking for, How To Repair Moen Bathroom Faucets?

Then, you are at the right place.

Here we have shared a whole step-by-step process to accomplish the job.

Does anybody else get annoyed when the bathroom faucet drizzles continuously?

It drives me absolutely nuts to determine water just being a famished day in and day out.

In this easy article, I’ll explain how to repair the Moen bathroom faucet in fewer than 15 minutes.

Cracked cartridges are one of the main logic you get water discharge from bathroom faucets and they’re easy to repair.

So let’s begin.

The first step in repairing any two-handled faucet drip is to resolve which handle has a poor quality seal.

To test the left handle’s seal you’ll want to turn the water off to the right handle.

Below your sink, there should be two shut-off valves that attach the water lines to each various faucet handle.

The structure will look good after doing this.

Quick Navigation!

A Complete Guide To Repair Moen Bathroom Faucets:

Moen Bathroom Faucets

Our Best Pick Up For Metering Faucet:

Turn off the right handle’s shutoff valve bypass it to the right until it stops.

Then turn on the right handle at the sink to release the staying water that’s in it.

Check the faucet to see if there are any leaks. Even if you do see leaks this expresses the left handle’s seals are bad.

You should also approve to make sure the right handle is in exceptional shape.

 In order to do this you obligation to turn the right faucet handle’s shutoff valve back on. To the right faucet handle then turn it back off and must make sure water is running.

Now turn off the left handle’s shutoff valve and discharge all the water out of its fund line that supply by turning the handle to the on point.

Does the faucet have any drips of water coming out of it? If the feedback is no then your right handle has good seals.

In my case, there were still leaks when the right handle’s shutoff valve water was turned off.

This indicated a poor quality seal in the left faucet handle.

Let The Dismantling Begin:

Let The Dismantling BeginThis is the amusing component for me, taking apart the faucet.

I consistently boost you to catch the image of the action in case you need to assign it back to how the composition used to be before it was fidget with.

In the case of this Moen faucet, I desired to unscrew the base of the faucet handle.

If you have a very much alike handle you can achieve this by hand most of the time. Turn the base to the left to unscrew it.

This will bring to light the brass nut that grips the cartridge in place.

You will need to break up the nut with two of something of channel locks. Change the brass nut to the left to unscrew it.

At this mark, my large tip is to take a picture of how the cartridge cover in the faucet handles the body.

There are commonly limited square tabs on the cartridge that protect it in place but you will also need to pay consideration to the cartridge stem area.

Drag the cartridge consecutive up from the faucet body using the channel locks.

Take the cartridge with you to the housewares store or Home storage place or Lowes in the form to discover the right replacement. I advocate buying the name-brand replacement cartridge.

Sure they’re an item more expensive ($10-12) but at least you know they’ll work!!!

It Doesn’t Get Any Easier:

Doesn’t Get Any Easier

With your advanced faucet cartridge in grip, all you demand to do is assign back to the image you enchant of the stem area.

Take attention to the limited square indentation in the faucet something to grip in the body as well.

Now commonly put your new Moen replacement decline cartridge into the faucet.

Reattach the assumption nut that protected the cartridge in an area by hand tightening it then using avenue locks.

This nut doesn’t demand to be super tight.

Only safe the brass nut abundant to carry water from disclosing from below the brand new Moen replacement cartridge.

An acceptable way to analyze this is to turn on the shut-off valve to the faucet handle before adding the faucet handle itself.

With the bathroom sinks decline new Moen replacement cartridge in place you can now put on the faucet handle.

Repeatedly, I hand narrow this type of handle only and don’t use channel locks.

The development of this repair is no more water dripping from the faucet, no more misuse of a precious essential capability, and no more money is combined with your water statement.

It’s also easy and cheap to complete.  So why wait, repair your leaky faucet this week.

 Wrapping It up!

I hope this article will help you in repairing.

A great tip to keep in mind is to take the previous Moen faucet cartridge with you to the store to establish you’re buying the correct reinstatement.

Leave a Comment